The Sum of Its Parts

Inspired by this article about the individual parts of a compact disc on the great site, CoverTalk, we wanted to do a similar post, but about Jewelboxing. So we setup a lightbox in the conference room and roped in our resident photographer in the studio, Bryan, to zoom in and make everything look beautiful. And that he did. Maybe even too well. Once he passed the photos back over to us and saw how terrific they looked, we felt like maybe doing some long write-up might take away from these cool images. So that said, here’s a little bit of writing on the various pieces, but remember that the emphasis is all on the pretty pictures.

Curved Case Corners One of the things that makes Jewelboxing so appealing are the perfectly rounded corners. Here you see non-hinge section of the case, with the tray insert, and the King booklet, not yet put in place.

 

 

The Paper The paper included is custom-milled and coated, specifically designed to be super-bright and work exceptionally well with consumer-grade, ink jet printers. Each sheet is double sided, so you’re able to print all the interiors and exteriors with equal results. Here we see a trayliner sheet about to be put in.

 

 

Reinforced Hinges and Tray Inserts The Jewelboxing system’s case consists of very sturdy plastic pieces. The hinges are reinforced, as you see from the shape in this photo. We’re also seeing here a tray insert about to snapped into the case. We say “snapped” because when you press down on the tray, you’ll hear it actually snap in, so you know it’s secure.

 

 

 

 

Advanced Locking Clasp A problem with most casing systems is that they don’t always stay securely fastened. Jewelboxing’s Advanced LockingClasp features two molded pieces on the top of the case that fit into two pieces on the bottom. Once they’re locked together, the case is as sturdy as can be. And if you try to open it without reading the instructions (“Press” it says), you’ll find it pretty difficult to crack it open.

 

 

Two-disc Hub We get calls every once in awhile from people like the look of Jewelboxing, but want something that can hold two discs. That’s a great request, because we can immediately fulfill it. Jewelboxing cases, in both the Standard and King sizes, have a two-disc hub, which essentially means that it’s twice the size of one found in a normal case, and stores two discs easily and safely, with plenty of distance between the two.

 

 

The SJB301/4-E Tab If you thought you were going to get all the way through a description of all the pieces of something without hearing a complicated number, here’s where you’re proved wrong. The tab, shown here, has a complex name, but performs a simple, but very effective task: holding the case’s cover. The tabs are just slightly larger than those found on your typical case and thus, are much more secure and much easier to work with as you remove the printed cover to look at the liner notes.

We hope this inside look at Jewelboxing will be valuable to you in some way, or you’ve at least enjoyed Bryan’s photos. We’re certain that every nook and cranny has been memorized now by the people in Hamburg, Bacup, Brooklyn, Decatur, Chicago, Tempe, Seattle, Palo Alto, Halifax, Mountain View, McAllen, New York, Brookline, Vancouver, Ridgefield, San Francisco, London, Baltimore, Toronto, Boulder, Bloomington, Tucson, Omaha, Sausalito, Roseville, Washington, Ottawa, Colorado Springs, and Irvine.

November 9, 2017 | Category: Blog | Tag: